stator_segment
Jun 15, 2026 12:31
· 5:09
· English
· Whisper Turbo
· 2 സ്പീക്കറുകള്
ഈ തീയതിയുടെ കാലാവധി അവസാനിക്കുന്നു 18 ദിനങ്ങള്
സ്ഥിരമായുള്ള സ്റ്റോറേജ് അപ്ഗ്രേഡ് ചെയ്യുക →
കാണിക്കല് മാത്രം.
0:00
S…
Speaker 1 (stator_segment)
This is a test for TRW sample segment winding
0:05
S…
Speaker 1 (stator_segment)
of stator cords.
0:06
S…
Speaker 1 (stator_segment)
Load up the tail sock tooling.
0:09
S…
Speaker 2 (stator_segment)
Measure
0:24
S…
Speaker 1 (stator_segment)
the start lead length by the
0:30
S…
Speaker 2 (stator_segment)
tension. On
0:52
S…
Speaker 1 (stator_segment)
the tensioner we have fitted a quick release which allows the operator to pull the wire
0:56
S…
Speaker 1 (stator_segment)
forward and then
1:03
S…
Speaker 1 (stator_segment)
reapply a fixed preset tension.
1:05
S…
Speaker 1 (stator_segment)
We've found to
1:09
S…
Speaker 1 (stator_segment)
achieve the required
1:12
S…
Speaker 1 (stator_segment)
winding specification and mechanical limits we've
1:16
S…
Speaker 1 (stator_segment)
had to insert a
1:21
S…
Speaker 2 (stator_segment)
quite
1:27
S…
Speaker 1 (stator_segment)
a high tension value releasing
1:32
S…
Speaker 2 (stator_segment)
end wire okay
2:03
S…
Speaker 2 (stator_segment)
the
2:13
S…
Speaker 1 (stator_segment)
finished product okay so
2:20
S…
Speaker 1 (stator_segment)
we're loading up the tailstock you can see the magnet in there to hold the
2:24
S…
Speaker 1 (stator_segment)
component the stator segment tailstock's
2:32
S…
Speaker 1 (stator_segment)
got a lock position in the forward
2:41
S…
Speaker 1 (stator_segment)
This isn't normally required every cycle.
2:44
S…
Speaker 2 (stator_segment)
Now
2:49
S…
Speaker 1 (stator_segment)
measure the required start lead length.
2:51
S…
Speaker 2 (stator_segment)
As
2:59
S…
Speaker 1 (stator_segment)
explained in the last video we've fitted a tension
3:04
S…
Speaker 1 (stator_segment)
release feature to enable the operator to pull the
3:08
S…
Speaker 1 (stator_segment)
wire and then reapply a fixed tension.
3:11
S…
Speaker 2 (stator_segment)
Winding
3:41
S…
Speaker 1 (stator_segment)
cycle is virtually automated.
3:47
S…
Speaker 1 (stator_segment)
However, for the last few turns,
3:49
S…
Speaker 1 (stator_segment)
to ensure that the wire is pushed right against the end flange
3:54
S…
Speaker 1 (stator_segment)
as per the drawing,
3:54
S…
Speaker 1 (stator_segment)
we've developed an extra guide to help push that wire
3:58
S…
Speaker 1 (stator_segment)
over.
3:59
S…
Speaker 1 (stator_segment)
There you can see it in action.
4:00
S…
Speaker 1 (stator_segment)
This needs to be confirmed if it's necessary according
4:06
S…
Speaker 1 (stator_segment)
to the drawings and real -life production.
4:08
S…
Speaker 1 (stator_segment)
Use a tension
4:13
S…
Speaker 1 (stator_segment)
release, wooden stick to not damage the
4:17
S…
Speaker 1 (stator_segment)
wire.
4:17
S…
Speaker 2 (stator_segment)
Bring the
4:29
S…
Speaker 2 (stator_segment)
end wire.
4:30
S…
Speaker 2 (stator_segment)
Can
4:50
S…
Speaker 1 (stator_segment)
you hold it?
4:50
S…
Speaker 2 (stator_segment)
Turn it.
4:58
S…
Speaker 1 (stator_segment)
And here you can see how the end wire is pushed up against the flange with that last bit of tooling.
ഈ അക്ഷം AI (സ്വയമുണ്ടായി അക്ഷരാനുഗ്രഹം) ഉണ്ടാക്കിയത്. പിശകുകള് ഉള്ക്കൊള്ളാം. അല്ലെങ്കില് മൂല ഓഡിയോ ഉപയോഗിക്കുന്നതിനു് മുന്കൂട്ടിയുള്ള പിശകുകള് സ്ഥിതീകരിക്കാം. ഐഐ നയം
സാരാംശം
ഈ അക്ഷരമാലയുടെ AI സമ്മറി ഉണ്ടാക്കാന് കെസ്റ്റെല് ക്ലിക്ക് ചെയ്യുക.
സഖാവ്...
ഈ ട്രാന്സ്പെക്റ്റിനെ കുറിച്ച് AI ചോദിയ്ക്കുക
ഈ പുസ്തകത്തെക്കുറിച്ച് എന്തെങ്കിലും ചോദിക്കുക — AI - ന് ആവശ്യമായ ഭാഗങ്ങൾ കണ്ടെത്തുകയും ഉത്തരം നൽകുകയും ചെയ്യും.