stator_segment

Jun 15, 2026 12:31 · 5:09 · English · Whisper Turbo · 2 Àwọn Àkọ́lé

Àwọn àkọlé yìí tí a kọ̀ nínú 18 ọjọ́. Àwọn ìṣàfihàn fún àwọn àwọn ààyè-iṣẹ́ ìdájọ →

Àwọn Àkọlé

0:00

S… Speaker 1 (stator_segment)

This is a test for TRW sample segment winding

0:05

S… Speaker 1 (stator_segment)

of stator cords.

0:06

S… Speaker 1 (stator_segment)

Load up the tail sock tooling.

0:09

S… Speaker 2 (stator_segment)

Measure

0:24

S… Speaker 1 (stator_segment)

the start lead length by the

0:30

S… Speaker 2 (stator_segment)

tension. On

0:52

S… Speaker 1 (stator_segment)

the tensioner we have fitted a quick release which allows the operator to pull the wire

0:56

S… Speaker 1 (stator_segment)

forward and then

1:03

S… Speaker 1 (stator_segment)

reapply a fixed preset tension.

1:05

S… Speaker 1 (stator_segment)

We've found to

1:09

S… Speaker 1 (stator_segment)

achieve the required

1:12

S… Speaker 1 (stator_segment)

winding specification and mechanical limits we've

1:16

S… Speaker 1 (stator_segment)

had to insert a

1:21

S… Speaker 2 (stator_segment)

quite

1:27

S… Speaker 1 (stator_segment)

a high tension value releasing

1:32

S… Speaker 2 (stator_segment)

end wire okay

2:03

S… Speaker 2 (stator_segment)

the

2:13

S… Speaker 1 (stator_segment)

finished product okay so

2:20

S… Speaker 1 (stator_segment)

we're loading up the tailstock you can see the magnet in there to hold the

2:24

S… Speaker 1 (stator_segment)

component the stator segment tailstock's

2:32

S… Speaker 1 (stator_segment)

got a lock position in the forward

2:41

S… Speaker 1 (stator_segment)

This isn't normally required every cycle.

2:44

S… Speaker 2 (stator_segment)

Now

2:49

S… Speaker 1 (stator_segment)

measure the required start lead length.

2:51

S… Speaker 2 (stator_segment)

2:59

S… Speaker 1 (stator_segment)

explained in the last video we've fitted a tension

3:04

S… Speaker 1 (stator_segment)

release feature to enable the operator to pull the

3:08

S… Speaker 1 (stator_segment)

wire and then reapply a fixed tension.

3:11

S… Speaker 2 (stator_segment)

Winding

3:41

S… Speaker 1 (stator_segment)

cycle is virtually automated.

3:47

S… Speaker 1 (stator_segment)

However, for the last few turns,

3:49

S… Speaker 1 (stator_segment)

to ensure that the wire is pushed right against the end flange

3:54

S… Speaker 1 (stator_segment)

as per the drawing,

3:54

S… Speaker 1 (stator_segment)

we've developed an extra guide to help push that wire

3:58

S… Speaker 1 (stator_segment)

over.

3:59

S… Speaker 1 (stator_segment)

There you can see it in action.

4:00

S… Speaker 1 (stator_segment)

This needs to be confirmed if it's necessary according

4:06

S… Speaker 1 (stator_segment)

to the drawings and real -life production.

4:08

S… Speaker 1 (stator_segment)

Use a tension

4:13

S… Speaker 1 (stator_segment)

release, wooden stick to not damage the

4:17

S… Speaker 1 (stator_segment)

wire.

4:17

S… Speaker 2 (stator_segment)

Bring the

4:29

S… Speaker 2 (stator_segment)

end wire.

4:30

S… Speaker 2 (stator_segment)

Can

4:50

S… Speaker 1 (stator_segment)

you hold it?

4:50

S… Speaker 2 (stator_segment)

Turn it.

4:58

S… Speaker 1 (stator_segment)

And here you can see how the end wire is pushed up against the flange with that last bit of tooling.

Àkọ́lé yìí láti inú AI (ìdákọ́ àwọn àkọ́lé nípa ìṣàfarawé). O lè ní àwọn àṣìṣe - ṣàyẹwo àwọn àwòrán ìṣàmúlò-ètò fún ìlòòrò. Àwọn ìtàn

❤️ O fẹ́ STT.ai? Fì sọ̀kalẹ̀ fún àwọn ọrẹ̀ rẹ̀!

Àwọn Àkọlé

Tẹ̀ Àwọn Àkọ́gbègbè láti ṣẹ̀dá àwọn àkọ́gbègbè AI tí a kọ́ nípa àkọ́gbègbè yìí.

Ǹgbàyé AI Àwọn Àkọ́kọ́

Fọ̀rọ̀ ohunkohun nipa àkọ́kọ́ yìí — AI náà yóò bá a lè ri àwọn ààyè tí a fẹ́ ki o si dáwọ́.

Ṣẹ̀dà Àwọn Àwọn Àkọ́kọ́