Spindle -replacement-part-1
Apr 08, 2026 12:03
· 0:56
· English
· Whisper Turbo
· 2 স্পিকার
এই ট্ৰান্সক্ৰিপ্টৰ মেয়াদ আজি শেষ হয়।
স্থায়ী সংৰক্ষণৰ বাবে উন্নীত কৰক →
অকল প্ৰদৰ্শন কৰা হৈছে
0:05
S…
Speaker 1 (Spindle -replacement-part-1)
This procedure will show you how to replace a 40 taper inline spindle in a mill.
0:09
S…
Speaker 1 (Spindle -replacement-part-1)
Just make sure you understand why the previous spindle failed before you install the new one.
0:17
S…
Speaker 1 (Spindle -replacement-part-1)
Disconnect the spindle lubrication tube.
0:22
S…
Speaker 1 (Spindle -replacement-part-1)
Remove the spindle lube fitting.
0:27
S…
Speaker 1 (Spindle -replacement-part-1)
If you find it difficult to remove the lube fitting, you can skip ahead and remove the protective cap from the replacement spindle and install it on the old one.
0:34
S…
Speaker 1 (Spindle -replacement-part-1)
This cap will protect the spindle during replacement.
0:37
S…
Speaker 1 (Spindle -replacement-part-1)
Remember that failed warranty spindles will be analyzed at the factory.
0:41
S…
Speaker 1 (Spindle -replacement-part-1)
They need to be protected and removed with care so the true cause of failure can be determined.
0:47
S…
Speaker 2 (Spindle -replacement-part-1)
Loosen the spindle bolts a few turns.
0:51
S…
Speaker 1 (Spindle -replacement-part-1)
Jog the z-axis in a negative direction until the spindle touches the table or a flat block.
এই অনুলিপি AI (স্বয়ংক্ৰিয় কথোপকথন স্বীকৃতি) দ্বাৰা সৃষ্টি কৰা হৈছে। ইয়াৰ অন্তৰ্গত ত্ৰুটি থাকিব পাৰে - গুৰুত্বপূৰ্ণ ব্যৱহাৰৰ বাবে মূল অডিঅ'ৰ সৈতে পৰীক্ষা কৰক। AI নীতি
সাৰাংশ
এই ট্ৰান্সক্ৰিপ্টৰ AI সাৰাংশ সৃষ্টি কৰিবলৈ সাৰাংশ ক্লিক কৰক।
সাৰাংশ...
এই অনুলিপিৰ বিষয়ে AI ক প্ৰশ্ন কৰক
এই অনুবাদৰ বিষয়ে যিকোনো প্ৰশ্ন কৰক — AI-এ প্ৰযোজ্য অংশসমূহ বিচাৰি পাব আৰু উত্তৰ দিব।