Spindle -replacement-part-1
Apr 08, 2026 12:03
· 0:56
· English
· Whisper Turbo
· 2 ಮಾತಾಡುವವರು
ಈ ಕಾರ್ಯಾಚರಣೆಯ ವಾಯಿದೆಯು ಇಂದಿಗೆ ಮುಗಿದಿದೆ.
ಶಾಶ್ವತ ಶೇಖರಣೆಗಾಗಿ ನವೀಕರಿಸಿ →
ಕೇವಲ ತೋರಿಸುವಿಕೆ
0:05
S…
Speaker 1 (Spindle -replacement-part-1)
This procedure will show you how to replace a 40 taper inline spindle in a mill.
0:09
S…
Speaker 1 (Spindle -replacement-part-1)
Just make sure you understand why the previous spindle failed before you install the new one.
0:17
S…
Speaker 1 (Spindle -replacement-part-1)
Disconnect the spindle lubrication tube.
0:22
S…
Speaker 1 (Spindle -replacement-part-1)
Remove the spindle lube fitting.
0:27
S…
Speaker 1 (Spindle -replacement-part-1)
If you find it difficult to remove the lube fitting, you can skip ahead and remove the protective cap from the replacement spindle and install it on the old one.
0:34
S…
Speaker 1 (Spindle -replacement-part-1)
This cap will protect the spindle during replacement.
0:37
S…
Speaker 1 (Spindle -replacement-part-1)
Remember that failed warranty spindles will be analyzed at the factory.
0:41
S…
Speaker 1 (Spindle -replacement-part-1)
They need to be protected and removed with care so the true cause of failure can be determined.
0:47
S…
Speaker 2 (Spindle -replacement-part-1)
Loosen the spindle bolts a few turns.
0:51
S…
Speaker 1 (Spindle -replacement-part-1)
Jog the z-axis in a negative direction until the spindle touches the table or a flat block.
ಈ ಆಟೊಮೇಷನ್ ಅನ್ನು (AI) ಯ ಮೂಲಕ ಉತ್ಪಾದಿಸಲಾಗಿದೆ. ಇದು ದೋಷಗಳನ್ನು ಹೊಂದಿರಬಹುದು. ಆರನೆಯ ಆಯ್ಕೆಯನ್ನು ಸಂಕ್ಷೇಪಿಸುವ ಸಲುವಾಗಿ ಮೂಲ ಆಡಿಯೋಪಣೆ( ಡೀಕನರಿಟಿಪ್) ಯಲ್ಲಿ ಪರಿಶೀಲಿಸಲಾಗುತ್ತದೆ. AI ಪಾಲಿಸಿ
ಸಾರಾಂಶ
ಈ ದಾಖಲಾತಿಯ ಒಂದು II ಸಾರಾಂಶವನ್ನು ಉತ್ಪಾದಿಸಲು ಉಪಘಟಕವನ್ನು ಒತ್ತಿ.
ಸಂಸ್ಕರಿಸುವಿಕೆ...
ಈ ಅನುವಾದದ ಬಗ್ಗೆ AI ಅನ್ನು ಕೇಳು@ option: check A
ಎಂದು ಕೇಳಬಹುದು.