Spindle -replacement-part-1
Apr 08, 2026 12:03
· 0:56
· English
· Whisper Turbo
· 2 സ്പീക്കറുകള്
ഈ തീയതിയുടെ കാലാവധി ഇന്നു് തീരുന്നു.
സ്ഥിരമായുള്ള സ്റ്റോറേജ് അപ്ഗ്രേഡ് ചെയ്യുക →
കാണിക്കല് മാത്രം.
0:05
S…
Speaker 1 (Spindle -replacement-part-1)
This procedure will show you how to replace a 40 taper inline spindle in a mill.
0:09
S…
Speaker 1 (Spindle -replacement-part-1)
Just make sure you understand why the previous spindle failed before you install the new one.
0:17
S…
Speaker 1 (Spindle -replacement-part-1)
Disconnect the spindle lubrication tube.
0:22
S…
Speaker 1 (Spindle -replacement-part-1)
Remove the spindle lube fitting.
0:27
S…
Speaker 1 (Spindle -replacement-part-1)
If you find it difficult to remove the lube fitting, you can skip ahead and remove the protective cap from the replacement spindle and install it on the old one.
0:34
S…
Speaker 1 (Spindle -replacement-part-1)
This cap will protect the spindle during replacement.
0:37
S…
Speaker 1 (Spindle -replacement-part-1)
Remember that failed warranty spindles will be analyzed at the factory.
0:41
S…
Speaker 1 (Spindle -replacement-part-1)
They need to be protected and removed with care so the true cause of failure can be determined.
0:47
S…
Speaker 2 (Spindle -replacement-part-1)
Loosen the spindle bolts a few turns.
0:51
S…
Speaker 1 (Spindle -replacement-part-1)
Jog the z-axis in a negative direction until the spindle touches the table or a flat block.
ഈ അക്ഷം AI (സ്വയമുണ്ടായി അക്ഷരാനുഗ്രഹം) ഉണ്ടാക്കിയത്. പിശകുകള് ഉള്ക്കൊള്ളാം. അല്ലെങ്കില് മൂല ഓഡിയോ ഉപയോഗിക്കുന്നതിനു് മുന്കൂട്ടിയുള്ള പിശകുകള് സ്ഥിതീകരിക്കാം. ഐഐ നയം
സാരാംശം
ഈ അക്ഷരമാലയുടെ AI സമ്മറി ഉണ്ടാക്കാന് കെസ്റ്റെല് ക്ലിക്ക് ചെയ്യുക.
സഖാവ്...
ഈ ട്രാന്സ്പെക്റ്റിനെ കുറിച്ച് AI ചോദിയ്ക്കുക
ഈ പുസ്തകത്തെക്കുറിച്ച് എന്തെങ്കിലും ചോദിക്കുക — AI - ന് ആവശ്യമായ ഭാഗങ്ങൾ കണ്ടെത്തുകയും ഉത്തരം നൽകുകയും ചെയ്യും.