Spindle -replacement-part-1
Apr 08, 2026 12:03
· 0:56
· English
· Whisper Turbo
· 2 ஒலிப்பேழைகள்
இந்த பதிவு இன்று காலாவதியாகிறது.
நிலையான சேமிப்புக்காக மேம்படுத்தல் →
காட்டு
0:05
S…
Speaker 1 (Spindle -replacement-part-1)
This procedure will show you how to replace a 40 taper inline spindle in a mill.
0:09
S…
Speaker 1 (Spindle -replacement-part-1)
Just make sure you understand why the previous spindle failed before you install the new one.
0:17
S…
Speaker 1 (Spindle -replacement-part-1)
Disconnect the spindle lubrication tube.
0:22
S…
Speaker 1 (Spindle -replacement-part-1)
Remove the spindle lube fitting.
0:27
S…
Speaker 1 (Spindle -replacement-part-1)
If you find it difficult to remove the lube fitting, you can skip ahead and remove the protective cap from the replacement spindle and install it on the old one.
0:34
S…
Speaker 1 (Spindle -replacement-part-1)
This cap will protect the spindle during replacement.
0:37
S…
Speaker 1 (Spindle -replacement-part-1)
Remember that failed warranty spindles will be analyzed at the factory.
0:41
S…
Speaker 1 (Spindle -replacement-part-1)
They need to be protected and removed with care so the true cause of failure can be determined.
0:47
S…
Speaker 2 (Spindle -replacement-part-1)
Loosen the spindle bolts a few turns.
0:51
S…
Speaker 1 (Spindle -replacement-part-1)
Jog the z-axis in a negative direction until the spindle touches the table or a flat block.
இந்த ஒலிப்பதிவு AI (தானியங்கி பேச்சு அடையாளம்) மூலம் உருவாக்கப்பட்டது. பிழைகள் இருக்கலாம் - முக்கியமான பயன்பாட்டுக்கு மூல ஒலியை சரிபார்க்கவும். AI கொள்கை
சுருக்கம்
இந்த நகலெடுப்புக்கான AI சுருக்கத்தை உருவாக்க சுருக்கம் என்பதை க்ளிக் செய்யவும்.
சுருக்கப்படுகிறது...
இந்த நகலை AI க்குக் கேட்கவும்
இந்த நூலைப் பற்றி ஏதாவது கேட்கவும் - AI தொடர்புடைய பகுதிகளைக் கண்டுபிடித்து பதிலளிக்கும்.