leaking-1

Sep 17, 2026 11:49 · 18:00 · English · Whisper Turbo · 8 ဟောပြောသူ
ဒီ transcript အတွင်းသက်တမ်းကုန်ဆုံး 18 ရက် 永久存储用升级 →
စာသင်ခန်း စာရင်းဇယား
သက်သက်သာ ဖော်ပြခြင်း
0:00
S… Speaker 1 (leaking-1)
Rebecca,
0:00
S… Speaker 1 (leaking-1)
I don't know if you are still with us,
0:02
S… Speaker 1 (leaking-1)
but I do have you noted here on my inventory sheet.
0:06
S… Speaker 1 (leaking-1)
It looks like you're on hold.
0:07
S… Speaker 1 (leaking-1)
Talking to myself here.
0:09
S… Speaker 1 (leaking-1)
Okay, no worries.
0:10
S… Speaker 1 (leaking-1)
Appreciate the heads up there.
0:14
S… Speaker 2 (leaking-1)
All right,
0:15
S… Speaker 1 (leaking-1)
that looks like just about all of us who have returned.
0:17
S… Speaker 1 (leaking-1)
So welcome to field practical part three.
0:22
S… Speaker 1 (leaking-1)
This is the last field practical and part
0:26
S… Speaker 1 (leaking-1)
three covers an emergency response scenario.
0:29
S… Speaker 1 (leaking-1)
where a BSO working on a battery housing encounters a leaking battery
0:34
S… Speaker 1 (leaking-1)
in the laboratory.
0:35
S… Speaker 1 (leaking-1)
The BSO will demonstrate the sequence following the proper
0:39
S… Speaker 1 (leaking-1)
safety protocols,
0:40
S… Speaker 1 (leaking-1)
including isolation,
0:42
S… Speaker 3 (leaking-1)
quarantine,
0:43
S… Speaker 1 (leaking-1)
and monitoring the battery.
0:45
S… Speaker 1 (leaking-1)
A leaking battery must be quarantined immediately after the emergency
0:49
is identified in a well-ventilated area and monitored for a minimum
0:53
S… Speaker 1 (leaking-1)
of four hours and ideally up to 12 hours with the
0:57
S… Speaker 1 (leaking-1)
SO2 monitor and infrared thermometer.
1:00
S… Speaker 1 (leaking-1)
Remember that as a BSO,
1:02
S… Speaker 1 (leaking-1)
you must maintain the battery emergency management plan,
1:05
S… Speaker 1 (leaking-1)
including assisting in training drills for incidents involving batteries.
1:10
S… Speaker 1 (leaking-1)
So this is an emergency response scenario that can be
1:14
S… Speaker 1 (leaking-1)
used as a training drill at your location.
1:18
S… Speaker 2 (leaking-1)
As a reminder,
1:20
all BSOs must complete an on-the-job training activity of packaging
1:24
S… Speaker 1 (leaking-1)
a damaged battery prior to receiving BSO certification.
1:28
S… Speaker 1 (leaking-1)
In addition,
1:29
S… Speaker 1 (leaking-1)
you may demonstrate the proper sequence of donning and doffing the required
1:33
PPE for packaging a damaged and non-damaged battery
1:37
as part of your Category 2 on-the-job training requirements.
1:41
S… Speaker 1 (leaking-1)
So we have our team's video feed
1:45
S… Speaker 1 (leaking-1)
fit to frame,
1:46
S… Speaker 1 (leaking-1)
everyone, right?
1:46
S… Speaker 4 (leaking-1)
You can see everything.
1:50
S… Speaker 1 (leaking-1)
Field Part 3,
1:51
S… Speaker 1 (leaking-1)
we have a lot of camera angles moving around,
1:53
S… Speaker 1 (leaking-1)
so I want to make sure that that's set on everyone's end.
1:55
S… Speaker 1 (leaking-1)
It is giving me the thumbs up here.
1:57
S… Speaker 1 (leaking-1)
Alvin,
1:58
S… Speaker 1 (leaking-1)
all right, excellent.
2:02
S… Speaker 1 (leaking-1)
Our BSO,
2:03
S… Speaker 1 (leaking-1)
Luis Martinez,
2:04
S… Speaker 1 (leaking-1)
will act as the BSO at the base.
2:07
S… Speaker 1 (leaking-1)
He will assist while I explain the emergency response scenario.
2:11
S… Speaker 2 (leaking-1)
Our BSO has finished
2:15
S… Speaker 1 (leaking-1)
servicing a tool in the workshop and is now bringing the tool into
2:19
S… Speaker 1 (leaking-1)
the laboratory to remove the battery housing from the tool and then to remove
2:24
S… Speaker 1 (leaking-1)
the battery from the housing.
2:25
S… Speaker 1 (leaking-1)
Our BSO has entered the laboratory,
2:28
S… Speaker 1 (leaking-1)
placed the tool on the workbench,
2:31
S… Speaker 1 (leaking-1)
After removing the battery housing from the tool,
2:34
S… Speaker 1 (leaking-1)
the BSO places the housing on the table,
2:37
S… Speaker 1 (leaking-1)
and then will begin removing the battery.
2:40
S… Speaker 5 (leaking-1)
The BSO
2:44
notices a yellowish-greenish liquid on the battery,
2:47
S… Speaker 1 (leaking-1)
indicating that there's leaking electrolyte.
2:50
S… Speaker 1 (leaking-1)
The BSO places the battery and housing on the workbench and then
2:54
S… Speaker 1 (leaking-1)
retreats from the workbench,
2:55
S… Speaker 1 (leaking-1)
then begins focusing on evacuating the area and quarantining
2:59
S… Speaker 2 (leaking-1)
the battery.
3:03
S… Speaker 1 (leaking-1)
The BSO instructs personnel to evacuate the immediate area and establishes
3:07
a 25-meter exclusion zone.
3:09
The area has an HVAC system in common with another area
3:13
S… Speaker 1 (leaking-1)
or building.
3:14
S… Speaker 1 (leaking-1)
The BSO instructs personnel to evacuate those areas and buildings
3:18
S… Speaker 1 (leaking-1)
as well.
3:19
S… Speaker 1 (leaking-1)
If the area is not well ventilated,
3:21
S… Speaker 1 (leaking-1)
the BSO sets up portable fans,
3:23
S… Speaker 1 (leaking-1)
provide fresh air.
3:24
S… Speaker 1 (leaking-1)
Just evaluate where those fumes might be pushed by the fan when you're setting up
3:28
S… Speaker 1 (leaking-1)
that ventilation.
3:29
S… Speaker 5 (leaking-1)
Okay,
3:31
S… Speaker 1 (leaking-1)
so our BSO has evacuated the area.
3:33
S… Speaker 1 (leaking-1)
Then we'll place caution tape across the doors that lead
3:38
S… Speaker 1 (leaking-1)
to the laboratory or warehouse within the 25 meter exclusion zone.
3:42
S… Speaker 5 (leaking-1)
BSO
3:46
S… Speaker 1 (leaking-1)
can also place do not enter signs with the BSO and
3:50
S… Speaker 1 (leaking-1)
HSE contact information on the laboratory doors.
3:53
S… Speaker 5 (leaking-1)
Next
3:59
S… Speaker 1 (leaking-1)
step is the BSO will contact HSE and immediate manager on duty.
4:03
S… Speaker 1 (leaking-1)
Meeting between the BSO HSE manager will be conducted.
4:08
S… Speaker 1 (leaking-1)
The BSO provides a brief summary of the incident and provides the location
4:12
S… Speaker 1 (leaking-1)
of the leaking battery inside the laboratory.
4:14
S… Speaker 1 (leaking-1)
The BSO and HSC team complete a hazard
4:18
S… Speaker 1 (leaking-1)
analysis and risk control assessment with HARC and a work permit
4:23
S… Speaker 1 (leaking-1)
for approval.
4:23
S… Speaker 1 (leaking-1)
The BSO and HSC will monitor
4:28
S… Speaker 1 (leaking-1)
the area with the SO2 monitor and infrared thermometer or camera for
4:32
S… Speaker 1 (leaking-1)
at least four hours.
4:33
S… Speaker 1 (leaking-1)
ideally up to 12 hours until the battery is cool to the ambient
4:37
S… Speaker 1 (leaking-1)
temperature and is no longer actively venting or leaking.
4:40
S… Speaker 1 (leaking-1)
BSO then gathers emergency response equipment nearby.
4:44
S… Speaker 1 (leaking-1)
This includes a 20 -pound class ABC dry chemical portable
4:49
S… Speaker 1 (leaking-1)
fire extinguisher and the spill kit.
4:53
S… Speaker 1 (leaking-1)
Ensure that your spill kit is stocked and inventoried regularly
4:57
S… Speaker 1 (leaking-1)
in the event that you may encounter an emergency response.
5:00
S… Speaker 1 (leaking-1)
scenario at your base.
5:01
S… Speaker 1 (leaking-1)
Remember that inventory and inspecting a spill kit,
5:04
S… Speaker 1 (leaking-1)
that's also one of the core category two activities that may be completed
5:08
S… Speaker 1 (leaking-1)
during the on the job training process.
5:10
S… Speaker 3 (leaking-1)
So once the battery is cooled,
5:14
S… Speaker 1 (leaking-1)
no longer venting and has completed the quarantine and monitoring time period,
5:18
S… Speaker 1 (leaking-1)
the battery can then be packaged.
5:21
S… Speaker 1 (leaking-1)
No packaging should be completed until the quarantine period is complete.
5:24
S… Speaker 1 (leaking-1)
The BSO designates an electrical engineer with level 2
5:28
S… Speaker 1 (leaking-1)
training to establish the required buddy system.
5:31
S… Speaker 1 (leaking-1)
Both discuss the scenario and complete a test run of the packaging activities
5:36
S… Speaker 1 (leaking-1)
prior to donning the required PPE and entering the laboratory.
5:39
S… Speaker 1 (leaking-1)
Designated warm zone of the workshop,
5:42
S… Speaker 1 (leaking-1)
the BSO stages the spill kit and then prepares the packaging material.
5:48
S… Speaker 1 (leaking-1)
Our damage battery will be packaged in a Mylar inner packaging.
5:51
S… Speaker 1 (leaking-1)
So before donning the PPE and entering the hot zone,
5:55
S… Speaker 1 (leaking-1)
we're going to prepare the Mylar by marking the outside with UN3090,
5:59
S… Speaker 1 (leaking-1)
heart number,
6:01
S… Speaker 1 (leaking-1)
serial number,
6:02
S… Speaker 1 (leaking-1)
and the word damage.
6:03
S… Speaker 1 (leaking-1)
As you can see,
6:05
S… Speaker 1 (leaking-1)
our BSO is also going to prepare the Mylar by folding one end and
6:09
S… Speaker 1 (leaking-1)
taping it closed with duct tape.
6:11
S… Speaker 5 (leaking-1)
So
6:17
S… Speaker 1 (leaking-1)
our BSO will go ahead and show us the Mylar with the markings.
6:22
S… Speaker 6 (leaking-1)
Next step,
6:23
S… Speaker 1 (leaking-1)
of course, placing a scoop of vermiculite inside of the Mylar,
6:26
S… Speaker 1 (leaking-1)
then we're going to set that aside.
6:28
S… Speaker 5 (leaking-1)
Now,
6:29
S… Speaker 5 (leaking-1)
here's
6:44
S… Speaker 1 (leaking-1)
where the BSO and Buddy will inspect and don the required PPE.
6:48
S… Speaker 1 (leaking-1)
We may demonstrate the proper donning and dopping sequence of the PPE
6:52
S… Speaker 1 (leaking-1)
that's required when handling damaged and non -damaged batteries as part of your Category
6:56
S… Speaker 1 (leaking-1)
2 on -the -job training activities.
6:59
S… Speaker 1 (leaking-1)
PPE for damaged batteries will be worn on top of the base PPE.
7:04
S… Speaker 1 (leaking-1)
The BSO will gather and inspect the required PPE and safety equipment prior to
7:08
S… Speaker 1 (leaking-1)
donning.
7:08
S… Speaker 1 (leaking-1)
You will need an IR thermometer or camera,
7:12
S… Speaker 1 (leaking-1)
SO2 monitors.
7:13
S… Speaker 1 (leaking-1)
The monitor must be worn in the breathing space of the BSO and
7:18
S… Speaker 1 (leaking-1)
their buddy and placed on the table where the battery is located.
7:21
S… Speaker 7 (leaking-1)
Nitrile gloves,
7:23
S… Speaker 1 (leaking-1)
respirators with new organic vapor and acid gas combination
7:27
S… Speaker 1 (leaking-1)
cartridges.
7:29
S… Speaker 1 (leaking-1)
Keep in mind that only personnel who are authorized for respirator use
7:33
S… Speaker 1 (leaking-1)
may wear the respirators.
7:34
S… Speaker 1 (leaking-1)
So if their BSO and their buddy are not authorized to wear respirators,
7:38
S… Speaker 1 (leaking-1)
you may wear a dust mask instead,
7:40
S… Speaker 1 (leaking-1)
only once you've ensured that the battery is no longer hot or venting.
7:44
S… Speaker 1 (leaking-1)
We need a Taichem suit,
7:47
S… Speaker 1 (leaking-1)
safety glasses,
7:48
S… Speaker 1 (leaking-1)
and face shield,
7:49
S… Speaker 1 (leaking-1)
though this is not required if the full -face respirator will be worn instead.
7:53
S… Speaker 3 (leaking-1)
Of course,
7:54
S… Speaker 1 (leaking-1)
we need the hard hat.
7:58
S… Speaker 1 (leaking-1)
Now on the topic of SO2 monitors,
8:00
S… Speaker 1 (leaking-1)
an SO2 monitor must be worn when handling or packaging the damaged batteries.
8:04
S… Speaker 1 (leaking-1)
So make sure you're following the manufacturer's instructions,
8:07
S… Speaker 1 (leaking-1)
including activation and performing a self -test prior
8:11
S… Speaker 1 (leaking-1)
to each use.
8:12
S… Speaker 1 (leaking-1)
So now I'll show a video that demonstrates that complete and proper sequence for
8:16
S… Speaker 1 (leaking-1)
using the SO2 monitors,
8:18
S… Speaker 1 (leaking-1)
starting with removing the SO2 monitor from JET packaging all
8:22
S… Speaker 1 (leaking-1)
the way through donning the SO2 monitor.
8:24
S… Speaker 5 (leaking-1)
This is
8:28
S… Speaker 1 (leaking-1)
what the SO2 monitors look like when you receive them from JET.
8:32
S… Speaker 1 (leaking-1)
Come in these clear plastic tubes here.
8:34
S… Speaker 4 (leaking-1)
Of course,
8:36
S… Speaker 1 (leaking-1)
remove the monitor from the packaging.
8:38
S… Speaker 5 (leaking-1)
Activate
8:53
S… Speaker 1 (leaking-1)
it and press that button and hold it for five seconds.
8:56
S… Speaker 5 (leaking-1)
Now
9:01
S… Speaker 1 (leaking-1)
you'll remove the black plastic cap.
9:04
S… Speaker 3 (leaking-1)
Initiate the self -test.
9:07
S… Speaker 1 (leaking-1)
You press the button,
9:08
S… Speaker 1 (leaking-1)
hold it for one second.
9:09
S… Speaker 1 (leaking-1)
Blink in the lights flash.
9:12
S… Speaker 8 (leaking-1)
You're good to go.
9:13
S… Speaker 3 (leaking-1)
Blinks five times in
9:17
S… Speaker 1 (leaking-1)
the lights flash.
9:17
S… Speaker 1 (leaking-1)
That means it failed the self -test.
9:19
S… Speaker 1 (leaking-1)
You do not want to use that SO2 monitor.
9:21
S… Speaker 1 (leaking-1)
So repeat that for all the monitors that you will be using.
9:27
S… Speaker 1 (leaking-1)
one on the work surface,
9:28
S… Speaker 1 (leaking-1)
and then place one on your lapel in your breathing zone.
9:31
S… Speaker 1 (leaking-1)
If an alarm activates,
9:34
S… Speaker 1 (leaking-1)
evacuate immediately.
9:36
S… Speaker 5 (leaking-1)
So
9:40
S… Speaker 1 (leaking-1)
we'll now go ahead and perform a self -test on the monitors that we'll be using today.
9:44
S… Speaker 3 (leaking-1)
Remember,
9:45
S… Speaker 1 (leaking-1)
if the detector beeps once,
9:47
S… Speaker 1 (leaking-1)
vibrates,
9:48
S… Speaker 1 (leaking-1)
and lights flash,
9:48
S… Speaker 1 (leaking-1)
the test was a success,
9:50
S… Speaker 1 (leaking-1)
and the monitor is ready for use.
9:54
S… Speaker 3 (leaking-1)
Good to go.
9:56
S… Speaker 1 (leaking-1)
We'll repeat that for all the other SO2 monitors that we'll be using.
10:00
S… Speaker 1 (leaking-1)
today.
10:00
S… Speaker 1 (leaking-1)
Let's talk about donning nitrile gloves.
10:04
S… Speaker 1 (leaking-1)
Nitrile gloves are required when handling and packaging damaged batteries and
10:08
S… Speaker 1 (leaking-1)
they come in a variety of sizes.
10:09
S… Speaker 1 (leaking-1)
So ensure that you have the correct nitrile glove size available in the spill
10:13
S… Speaker 1 (leaking-1)
kit. Remove one pair of gloves from the package and inspect it to
10:17
S… Speaker 1 (leaking-1)
be sure that there's no pinholes or tears present.
10:20
S… Speaker 1 (leaking-1)
You want to check for a secure fit around your fingers and the palm.
10:24
S… Speaker 1 (leaking-1)
That cuff should fit snugly around your wrist.
10:27
S… Speaker 1 (leaking-1)
You want to minimize any chance of exposure.
10:36
S… Speaker 1 (leaking-1)
If you are donning a half -face respirator,
10:38
S… Speaker 1 (leaking-1)
place the face shield on your hardhat.
10:40
S… Speaker 1 (leaking-1)
Safety glasses and face shield is required when using the half -face respirators,
10:45
S… Speaker 1 (leaking-1)
but keep in mind that if the respirator is full face,
10:48
S… Speaker 1 (leaking-1)
face shield and safety glasses are not required.
10:51
S… Speaker 5 (leaking-1)
Next,
10:54
S… Speaker 1 (leaking-1)
you want to check the function of the respirator and clean your respirator.
10:57
S… Speaker 1 (leaking-1)
Respirators must have the correct organic vapor acid
11:02
S… Speaker 1 (leaking-1)
gas combination cartridges.
11:03
S… Speaker 1 (leaking-1)
Those cartridges must also be new.
11:07
S… Speaker 1 (leaking-1)
So we'll grab a non -alcoholic wipe,
11:09
S… Speaker 1 (leaking-1)
thoroughly clean the inside of the respirator,
11:12
S… Speaker 5 (leaking-1)
discard
11:16
S… Speaker 1 (leaking-1)
the wipe, and then after cleaning,
11:18
S… Speaker 1 (leaking-1)
you can set that respirator aside for donning shortly.
11:21
S… Speaker 1 (leaking-1)
Keep in mind,
11:22
S… Speaker 1 (leaking-1)
BSO's electrical engineers,
11:24
S… Speaker 1 (leaking-1)
you have to be authorized to wear the respirators need to be fit -tested and
11:28
S… Speaker 1 (leaking-1)
be medically capable of wearing that respirator.
11:30
S… Speaker 4 (leaking-1)
Next,
11:32
S… Speaker 1 (leaking-1)
we'll inspect the Ticum suit.
11:34
S… Speaker 1 (leaking-1)
So we're going to conduct a visual inspection of the Ticum suit before you begin donning.
11:38
S… Speaker 1 (leaking-1)
Ensure that there's no holes or tears.
11:41
S… Speaker 1 (leaking-1)
thoroughly inspected before reuse,
11:43
S… Speaker 1 (leaking-1)
following the instructions provided in the manual.
11:46
S… Speaker 5 (leaking-1)
PSO
11:54
S… Speaker 1 (leaking-1)
has given us a thumbs up,
11:55
S… Speaker 1 (leaking-1)
so we'll now proceed to don the required PPE.
11:57
S… Speaker 1 (leaking-1)
First,
11:58
S… Speaker 1 (leaking-1)
you want to don the Tychum suit at waist level.
12:00
S… Speaker 5 (leaking-1)
Next
12:17
S… Speaker 1 (leaking-1)
step would be donning the respirator and checking its function.
12:20
S… Speaker 5 (leaking-1)
If you
12:24
S… Speaker 1 (leaking-1)
are using a half -face or full -face respirator,
12:27
S… Speaker 1 (leaking-1)
make sure that you're doing the positive and negative tests to check for a secure
12:31
S… Speaker 1 (leaking-1)
fit.
12:32
S… Speaker 1 (leaking-1)
Okay, now we'll finish donning the taikumsuit.
12:34
S… Speaker 1 (leaking-1)
Place one hand in the sleeve and pull the taikumsuit sleeve to your shoulder.
12:39
S… Speaker 1 (leaking-1)
You want to hold the arm elastic down firmly over the nitro
12:43
S… Speaker 1 (leaking-1)
gloves to ensure that no portion of your skin is exposed.
12:46
S… Speaker 1 (leaking-1)
So the BSO does not need to secure the taikumsuit at the arms
12:50
S… Speaker 1 (leaking-1)
or feet with duct tape.
12:51
S… Speaker 1 (leaking-1)
Elastic bands will suffice.
12:53
S… Speaker 1 (leaking-1)
Zip up the taikumsuit.
12:56
S… Speaker 1 (leaking-1)
You'll expose some adhesive tape.
12:58
S… Speaker 5 (leaking-1)
Pull
13:02
S… Speaker 1 (leaking-1)
the elastic hood down securely over the respirator.
13:10
S… Speaker 1 (leaking-1)
All right, and then press that adhesive tape down firmly onto the front of the coverall.
13:14
S… Speaker 1 (leaking-1)
Just make sure that you have a tight,
13:16
S… Speaker 1 (leaking-1)
secure seal from the neck down and check that you have a snug fit between the
13:20
S… Speaker 1 (leaking-1)
hood and your respirator.
13:21
S… Speaker 5 (leaking-1)
Okay,
13:23
S… Speaker 1 (leaking-1)
clip on the SO2 monitor into your lapel or the breathing zone.
13:26
S… Speaker 5 (leaking-1)
Place the
13:33
S… Speaker 1 (leaking-1)
hard hat with the face shield over the Tychum suit hood.
13:36
S… Speaker 4 (leaking-1)
Remaining
13:42
S… Speaker 1 (leaking-1)
packaging supplies,
13:43
S… Speaker 1 (leaking-1)
your Mylar,
13:44
S… Speaker 1 (leaking-1)
your other SO2 monitor,
13:46
S… Speaker 1 (leaking-1)
and the infrared thermometer.
13:47
S… Speaker 1 (leaking-1)
And we can go ahead and proceed to the laboratory.
13:51
S… Speaker 1 (leaking-1)
After PP is done properly,
13:53
S… Speaker 1 (leaking-1)
BSO and the buddy will return to the laboratory to
13:57
S… Speaker 1 (leaking-1)
package the damaged battery.
13:59
S… Speaker 5 (leaking-1)
So
14:08
S… Speaker 1 (leaking-1)
it's going to follow the steps that we demonstrated in the prior
14:13
S… Speaker 1 (leaking-1)
field presentations to place the battery in the Mylar inner packaging and
14:17
S… Speaker 1 (leaking-1)
then secure the Mylar closed using a heat sealer or the folding method with duct
14:21
S… Speaker 1 (leaking-1)
tape.
14:22
S… Speaker 3 (leaking-1)
But before that,
14:23
S… Speaker 1 (leaking-1)
we want to monitor the battery throughout the packaging process.
14:26
S… Speaker 1 (leaking-1)
BSO is going to run the SO2 monitor over the battery.
14:12
S… Speaker 1 (leaking-1)
the prior field presentations
14:14
S… Speaker 1 (leaking-1)
to place the battery in the mylar inner packaging and then secure the mylar closed
14:19
S… Speaker 1 (leaking-1)
using a heat
14:19
S… Speaker 1 (leaking-1)
sealer or the folding method with the duct tape but before that
14:23
S… Speaker 1 (leaking-1)
we want to monitor the
14:25
S… Speaker 1 (leaking-1)
battery throughout the packaging process.
14:26
S… Speaker 1 (leaking-1)
BDSO is going to run the SO2 monitor over the battery
14:32
S… Speaker 1 (leaking-1)
Place it just next to the damaged battery on the work surface.
14:35
S… Speaker 2 (leaking-1)
Now grab your iHeart thermometer,
14:37
S… Speaker 1 (leaking-1)
check the ambient temperature first,
14:39
S… Speaker 5 (leaking-1)
temperature
14:45
S… Speaker 1 (leaking-1)
of the battery,
14:46
S… Speaker 1 (leaking-1)
and make sure that it hasn't heated above the ambient temperature.
14:49
S… Speaker 3 (leaking-1)
Looks like we're good to go.
14:53
S… Speaker 1 (leaking-1)
So if the SO2 monitor is activated or the temperature rises
14:58
S… Speaker 1 (leaking-1)
again exceeding the ambient temperature,
15:00
S… Speaker 1 (leaking-1)
stop packaging immediately and return to the quarantine procedures.
15:03
S… Speaker 1 (leaking-1)
Now go ahead and proceed with packaging the damaged battery.
15:08
S… Speaker 1 (leaking-1)
Quickly slide it into the mylar.
14:32
S… Speaker 1 (leaking-1)
Place it just next to the damaged battery on the work surface.
14:35
S… Speaker 1 (leaking-1)
Now grab your iHeart thermometer, check the ambient temperature first.
15:10
S… Speaker 1 (leaking-1)
repeat the folding method remember you fold both corners inwards and
15:14
S… Speaker 1 (leaking-1)
downwards three times secure it all the way around the duct tape you
15:19
S… Speaker 5 (leaking-1)
have
15:24
S… Speaker 1 (leaking-1)
it now once the inner packaging is complete the pso will bring the battery
15:28
S… Speaker 1 (leaking-1)
to the designated bsu for the damaged batteries center
15:33
S… Speaker 4 (leaking-1)
package
15:42
S… Speaker 1 (leaking-1)
is complete brought it to the bsu you'll go and return to the warm zone and
15:46
S… Speaker 1 (leaking-1)
dock your ppe that you use for packaging the damaged battery i'm
15:50
S… Speaker 1 (leaking-1)
going to first remove the nitro gloves
15:52
S… Speaker 1 (leaking-1)
Now the goal is to remove the nitrile gloves without the skin coming into contact with
15:57
S… Speaker 1 (leaking-1)
the outside of the gloves.
15:58
S… Speaker 1 (leaking-1)
So grasp the outside edge of the nitrile glove near the wrist by
16:02
S… Speaker 1 (leaking-1)
pinching the cuff with your thumb and index finger.
16:05
S… Speaker 1 (leaking-1)
Peel the nitrile glove away from the hand,
16:08
S… Speaker 1 (leaking-1)
turning it inside out.
16:09
S… Speaker 1 (leaking-1)
Grasp that glove completely in your opposite gloved hand and
16:13
S… Speaker 1 (leaking-1)
close it tight,
16:14
S… Speaker 1 (leaking-1)
prevent it from hanging down.
16:16
S… Speaker 1 (leaking-1)
Slide your index finger from your ungloved hand under the cuff of the
16:21
S… Speaker 1 (leaking-1)
remaining nitrile glove,
16:22
S… Speaker 1 (leaking-1)
being careful not to touch the outside of the nitrile glove,
16:25
S… Speaker 1 (leaking-1)
feel the remaining glove off,
16:27
S… Speaker 1 (leaking-1)
creating a bag,
16:29
S… Speaker 1 (leaking-1)
and then discard both of the gloves.
16:31
S… Speaker 1 (leaking-1)
That will minimize any potential contact with any thinochloride
16:36
S… Speaker 1 (leaking-1)
that may touch the nitrile gloves.
16:37
S… Speaker 3 (leaking-1)
Next up,
16:39
S… Speaker 1 (leaking-1)
unclip the SO2 monitor and store it inside of the spill kit.
16:47
S… Speaker 1 (leaking-1)
the hard hat with the face shield,
16:48
S… Speaker 1 (leaking-1)
place that in the spill kit as well,
16:50
S… Speaker 1 (leaking-1)
but leave your safety glasses on.
16:52
S… Speaker 5 (leaking-1)
To
16:56
S… Speaker 1 (leaking-1)
remove the Tycum suit,
16:57
S… Speaker 1 (leaking-1)
you'll start by pulling off the closure over the zipper.
17:00
S… Speaker 1 (leaking-1)
You can open and widen the closure.
17:02
S… Speaker 1 (leaking-1)
Next,
17:03
S… Speaker 1 (leaking-1)
you'll unzip the suit,
17:04
S… Speaker 8 (leaking-1)
remove the hood,
17:07
S… Speaker 1 (leaking-1)
and then take off the suit.
17:08
S… Speaker 1 (leaking-1)
You do want to try to turn the suit inside out as much as possible
17:13
S… Speaker 1 (leaking-1)
to minimize contact with other surfaces.
17:01
S… Speaker 1 (leaking-1)
You can open and widen the closure.
17:03
S… Speaker 1 (leaking-1)
Next, you'll unzip the suit,
17:04
S… Speaker 8 (leaking-1)
remove the hood,
17:07
S… Speaker 1 (leaking-1)
and then take off the suit.
17:09
S… Speaker 1 (leaking-1)
You do want to try to turn the suit inside out as much as possible
17:13
S… Speaker 1 (leaking-1)
to minimize contact with other surfaces.
17:16
S… Speaker 1 (leaking-1)
So, you notice our BSO is kind of shimmying out of the Tycum
17:20
S… Speaker 1 (leaking-1)
suit there.
17:16
S… Speaker 1 (leaking-1)
So notice our BSO is kind of shimmying out of the Tycum
17:20
S… Speaker 1 (leaking-1)
suit there.
17:20
S… Speaker 1 (leaking-1)
You want to try to avoid touching the exterior.
17:23
S… Speaker 4 (leaking-1)
Now if
17:27
S… Speaker 1 (leaking-1)
the Tycum suit has been contaminated or is suspected of being contaminated,
17:31
S… Speaker 1 (leaking-1)
you must undergo fuel decontamination to clean the suit following
17:35
S… Speaker 1 (leaking-1)
the instructors and the manufacturer user manual.
17:38
S… Speaker 1 (leaking-1)
If you will be undergoing fuel decontamination,
17:41
S… Speaker 1 (leaking-1)
do not remove your nitrile gloves until after you have removed and cleaned the suit.
17:21
S… Speaker 1 (leaking-1)
You want to try to avoid touching the exterior.
17:45
S… Speaker 1 (leaking-1)
If you suspect that residual material is still present after cleaning,
17:49
S… Speaker 1 (leaking-1)
discard the suit right away.
17:51
S… Speaker 6 (leaking-1)
With that said,
17:53
S… Speaker 1 (leaking-1)
these Tychum suits are designed for limited use applications,
17:56
S… Speaker 1 (leaking-1)
so they can be worn until damaged,
17:59
S… Speaker 1 (leaking-1)
altered,
17:59
S… Speaker 1 (leaking-1)
or controlled.

ဤ transcript ကို AI က generated ခဲ့သည် (အလိုအလျောက်စကားပြောအသိအမှတ်ပြု). အမှားအယွင်းများပါဝင်နိုင်ပါတယ် — အရေးပါသောအသုံးပြုမှုအတွက်မူရင်းအသံကိုနှိုင်းယှဉ်စစ်ဆေးပါ။ AI စည်းမျဉ်း

❤️ ချစ်ခြင်းမေတ္တာ STT.ai? သင့်မိတ်ဆွေများကိုပြောပါ!
အကျဉ်းချုပ်
ဤ transcript ၏ AI အတိုချုပ်ထုတ်လုပ်ရန် Summarize ကိုနှိပ်ပါ.
အကျဉ်းချုပ်နေသည်...
ဒီ transcript အကြောင်းကို AI ကိုမေး
ဒီ transcript အကြောင်းကိုဘာမှမေးပါ - AI သက်ဆိုင်သောအပိုင်းများကိုရှာဖွေတွေ့ရှိနှင့်အဖြေပေးလိမ့်မည်။
အခြား ဘာသာပြန်