Spindle-replacement-part-2
Apr 08, 2026 12:06
· 1:11
· English
· Whisper Turbo
· 2 & Kefluniañ
Echu eo an treuzkas-mañ hiziv.
Hizivaat evit enrollañ da viken →
Diskouez hepken
0:03
S…
Speaker 2 (Spindle-replacement-part-2)
Remove the spindle screws.
0:06
S…
Speaker 1 (Spindle-replacement-part-2)
At this point, if you have not yet removed the spindle loop fitting,
0:09
S…
Speaker 1 (Spindle-replacement-part-2)
you can rotate the spindle so you have better access to the fitting.
0:17
S…
Speaker 1 (Spindle-replacement-part-2)
Install a 1 1⁄8 MPT plug below flush with the surface of the spindle
0:21
S…
Speaker 1 (Spindle-replacement-part-2)
or use the rubber plug from the replacement spindle.
0:24
S…
Speaker 1 (Spindle-replacement-part-2)
Rotate the spindle back to its original position
0:26
S…
Speaker 1 (Spindle-replacement-part-2)
and jog the z-axis up slowly to remove the spindle.
0:34
S…
Speaker 1 (Spindle-replacement-part-2)
Make note of any shim locations and remove the shims.
0:39
S…
Speaker 1 (Spindle-replacement-part-2)
If your machine uses a coupler,
0:41
S…
Speaker 1 (Spindle-replacement-part-2)
remove the spider coupling to be reused with the new spindle.
0:43
S…
Speaker 2 (Spindle-replacement-part-2)
Remove the coolant transfer tube.
0:46
S…
Speaker 1 (Spindle-replacement-part-2)
Sometimes these parts stay in the motor.
0:52
S…
Speaker 1 (Spindle-replacement-part-2)
Attach the red protective cap to the new spindle
0:54
S…
Speaker 1 (Spindle-replacement-part-2)
and the lube port plug if you removed it earlier.
0:58
S…
Speaker 1 (Spindle-replacement-part-2)
Clean and stone the spindle head surface and the new spindle's flange.
1:03
S…
Speaker 1 (Spindle-replacement-part-2)
Apply a thin layer of lithium grease to the transfer tube o-rings,
1:06
S…
Speaker 1 (Spindle-replacement-part-2)
the spider coupler or dry pin bushings,
1:09
S…
Speaker 2 (Spindle-replacement-part-2)
and the lower spindle o-ring.
%s: Krouet eo bet an treuzwel-mañ gant AI (emgefreek). Fazioù a c'hell bezañ ennañ — gwiriañ ouzh an audio orin evit arverañ a-benn ar fin. Politikerez AI
Diverradenn
Klikit war Diverrañ evit krouiñ ur berradenn AI eus an treuzwel-mañ.
Emaon o tiverkañ...
Goulenn ouzh an AI diwar- benn an treuzwel- mañ
Goulenn petra bennak diwar-benn an treuzskrivadur-mañ - an AI a vo o klask rannoù a-feson ha respontoù.