Spindle-replacement-part-2

Apr 08, 2026 12:06 · 1:11 · English · Whisper Turbo · 2 ធុងបាស
អត្ថបទ​នេះ​ផុត​កំណត់​នៅ​ថ្ងៃ​នេះ & # 160; ។ ធ្វើ​ឲ្យ​ប្រសើរ​សម្រាប់​ការ​ផ្ទុក​ជា​និច្ច →
លិបិក្រម​ការ​បង្រៀន
បង្ហាញ​តែ
0:03
S… Speaker 2 (Spindle-replacement-part-2)
Remove the spindle screws.
0:06
S… Speaker 1 (Spindle-replacement-part-2)
At this point, if you have not yet removed the spindle loop fitting,
0:09
S… Speaker 1 (Spindle-replacement-part-2)
you can rotate the spindle so you have better access to the fitting.
0:17
S… Speaker 1 (Spindle-replacement-part-2)
Install a 1 1⁄8 MPT plug below flush with the surface of the spindle
0:21
S… Speaker 1 (Spindle-replacement-part-2)
or use the rubber plug from the replacement spindle.
0:24
S… Speaker 1 (Spindle-replacement-part-2)
Rotate the spindle back to its original position
0:26
S… Speaker 1 (Spindle-replacement-part-2)
and jog the z-axis up slowly to remove the spindle.
0:34
S… Speaker 1 (Spindle-replacement-part-2)
Make note of any shim locations and remove the shims.
0:39
S… Speaker 1 (Spindle-replacement-part-2)
If your machine uses a coupler,
0:41
S… Speaker 1 (Spindle-replacement-part-2)
remove the spider coupling to be reused with the new spindle.
0:43
S… Speaker 2 (Spindle-replacement-part-2)
Remove the coolant transfer tube.
0:46
S… Speaker 1 (Spindle-replacement-part-2)
Sometimes these parts stay in the motor.
0:52
S… Speaker 1 (Spindle-replacement-part-2)
Attach the red protective cap to the new spindle
0:54
S… Speaker 1 (Spindle-replacement-part-2)
and the lube port plug if you removed it earlier.
0:58
S… Speaker 1 (Spindle-replacement-part-2)
Clean and stone the spindle head surface and the new spindle's flange.
1:03
S… Speaker 1 (Spindle-replacement-part-2)
Apply a thin layer of lithium grease to the transfer tube o-rings,
1:06
S… Speaker 1 (Spindle-replacement-part-2)
the spider coupler or dry pin bushings,
1:09
S… Speaker 2 (Spindle-replacement-part-2)
and the lower spindle o-ring.

អត្ថបទ​នេះ​ត្រូវ​បាន​បង្កើត​ដោយ AI (ការ​ទទួល​ស្គាល់​ការ​និយាយ​ស្វ័យប្រវត្តិ) & # 160; ។ វា​អាច​មាន​កំហុស - ពិនិត្យ​មើល​អូឌីយ៉ូ​ដើម​សម្រាប់​ការ​ប្រើ​សំខាន់ & # 160; ។ គោលការណ៍ AI

❤️ ស្រឡាញ់ STT.ai? ប្រាប់មិត្តភក្តិរបស់អ្នក!
សេចក្ដី​សង្ខេប
ចុច សង្ខេប ដើម្បី​បង្កើត​សេចក្ដី​សង្ខេប AI នៃ​ការ​បកប្រែ​នេះ & # 160; ។
កំពុង​សង្ខេប...
សំណួរ AI អំពី​ការ​បកប្រែ​នេះ
សំណួរអ្វីមួយអំពីការបកប្រែនេះ - AI នឹងរកឃើញផ្នែកដែលទាក់ទងនិងឆ្លើយតប។
បម្លែង​ជា​សំឡេង​ផ្សេង​ទៀត