stator_segment
Jun 15, 2026 12:31
· 5:09
· English
· Whisper Turbo
· 2 Гучні
Цей трансферт застаріє в 18 Днів.
Оновлення для постійного зберігання →
Тільки показувати
0:00
S…
Speaker 1 (stator_segment)
This is a test for TRW sample segment winding
0:05
S…
Speaker 1 (stator_segment)
of stator cords.
0:06
S…
Speaker 1 (stator_segment)
Load up the tail sock tooling.
0:09
S…
Speaker 2 (stator_segment)
Measure
0:24
S…
Speaker 1 (stator_segment)
the start lead length by the
0:30
S…
Speaker 2 (stator_segment)
tension. On
0:52
S…
Speaker 1 (stator_segment)
the tensioner we have fitted a quick release which allows the operator to pull the wire
0:56
S…
Speaker 1 (stator_segment)
forward and then
1:03
S…
Speaker 1 (stator_segment)
reapply a fixed preset tension.
1:05
S…
Speaker 1 (stator_segment)
We've found to
1:09
S…
Speaker 1 (stator_segment)
achieve the required
1:12
S…
Speaker 1 (stator_segment)
winding specification and mechanical limits we've
1:16
S…
Speaker 1 (stator_segment)
had to insert a
1:21
S…
Speaker 2 (stator_segment)
quite
1:27
S…
Speaker 1 (stator_segment)
a high tension value releasing
1:32
S…
Speaker 2 (stator_segment)
end wire okay
2:03
S…
Speaker 2 (stator_segment)
the
2:13
S…
Speaker 1 (stator_segment)
finished product okay so
2:20
S…
Speaker 1 (stator_segment)
we're loading up the tailstock you can see the magnet in there to hold the
2:24
S…
Speaker 1 (stator_segment)
component the stator segment tailstock's
2:32
S…
Speaker 1 (stator_segment)
got a lock position in the forward
2:41
S…
Speaker 1 (stator_segment)
This isn't normally required every cycle.
2:44
S…
Speaker 2 (stator_segment)
Now
2:49
S…
Speaker 1 (stator_segment)
measure the required start lead length.
2:51
S…
Speaker 2 (stator_segment)
As
2:59
S…
Speaker 1 (stator_segment)
explained in the last video we've fitted a tension
3:04
S…
Speaker 1 (stator_segment)
release feature to enable the operator to pull the
3:08
S…
Speaker 1 (stator_segment)
wire and then reapply a fixed tension.
3:11
S…
Speaker 2 (stator_segment)
Winding
3:41
S…
Speaker 1 (stator_segment)
cycle is virtually automated.
3:47
S…
Speaker 1 (stator_segment)
However, for the last few turns,
3:49
S…
Speaker 1 (stator_segment)
to ensure that the wire is pushed right against the end flange
3:54
S…
Speaker 1 (stator_segment)
as per the drawing,
3:54
S…
Speaker 1 (stator_segment)
we've developed an extra guide to help push that wire
3:58
S…
Speaker 1 (stator_segment)
over.
3:59
S…
Speaker 1 (stator_segment)
There you can see it in action.
4:00
S…
Speaker 1 (stator_segment)
This needs to be confirmed if it's necessary according
4:06
S…
Speaker 1 (stator_segment)
to the drawings and real -life production.
4:08
S…
Speaker 1 (stator_segment)
Use a tension
4:13
S…
Speaker 1 (stator_segment)
release, wooden stick to not damage the
4:17
S…
Speaker 1 (stator_segment)
wire.
4:17
S…
Speaker 2 (stator_segment)
Bring the
4:29
S…
Speaker 2 (stator_segment)
end wire.
4:30
S…
Speaker 2 (stator_segment)
Can
4:50
S…
Speaker 1 (stator_segment)
you hold it?
4:50
S…
Speaker 2 (stator_segment)
Turn it.
4:58
S…
Speaker 1 (stator_segment)
And here you can see how the end wire is pushed up against the flange with that last bit of tooling.
Цей трансляційний документ було створено ШІ (автоматичне розпізнавання мови). Може міститися печки } перевірки на оригінальний аудіо для критичного використання. Правила комп' ютерного гравця
Зведення
Натисніть Summarize, щоб створити резюме AI з цього запису.
Сума...
Запитати комп' ютерного гравця про цей маршрутний індекс
Спитайте що-небудь про цей трансляція ⇩AI знайде відповідні частини і відповідь.